Free calculators
Framing calculators
Free framing calculators for floor joist spans, wall studs, stairs, and roof pitch. Each one works in the browser, uses US units, and shows the 2021 IRC section or table behind the numbers where the code sets them.
All calculators
Joist span calculator
Free floor joist span calculator: pick joist size, species, grade, spacing and load to read the maximum span from 2021 IRC Tables R502.3.1(1) and (2).
Open calculator →Wall framing calculator
Free wall framing calculator: enter wall length, stud spacing and openings to count studs, plates and king and jack studs, with on-center layout marks.
Open calculator →Stair calculator
Free stair calculator: enter total rise and tread depth to get riser count, riser height, total run and stringer length, checked against 2021 IRC R311.7.
Open calculator →Roof pitch calculator
Free roof pitch calculator: convert rise and run to pitch per 12, degrees and percent grade, and get the common rafter length including overhang.
Open calculator →
The tables behind the calculators
- Floor joist span table, the reference for the joist span calculator.
- Stud spacing guide, the reference for the wall framing calculator.
- Stair riser height code, the reference for the stair calculator.
- Roof pitch and slope, the reference for the roof pitch calculator.
Results are preliminary figures for planning. The code edition and local amendments adopted where you build govern, and the building official has the final say. To draw the framing itself, open the free framing studio.